| |
| |
 |
| Burglar
Alarm Systems |
| |
| Features
|
 |
Control
Panel |
| |
- Eight
hardwire zones standard |
| |
- Expands to 38 total
zones (30 zones using wireless and/or 16 hardwire zones) |
| |
- 48 event log |
| |
- Two partitions
with common area logic |
| |
- Built-in phone
line cut monitor |
| |
- 15 user codes per
partition |
| |
- Supports four relays
or eight X-10 devices |
| |
- Fast and easy E2
programming Mode |
| |
- Wireless remote
control - single button system control with a wireless device
5804 four button programmable wireless key
5804 BD bi-directional floor button programmable wireless
key with system status feedback |
| |
- Home automation
activates lights appliances, garage doors and numerous other
device
|
| |
- VIP phone module
gives the end user ability to control the system from any touchtone
phone |
| |
- Quick exit enables
users to leave the house for a brief time without disarming
the system |
| |
- Full English display
keypads provide a clear understanding of system status and zone
locations |
| |
- Chime by zone can
be activated when the system is disarmed (this feature programs
entrance and exit points to chime when opened) |
| |
- Paging sends openings,
closings, alarm and trouble messages directly to a pager, allowing
system status to be confirmed |
| |
-Ten custom alpha
words |
| |
- False alarm reduction
features |
| |
| |
| Specifications |
|
Vista
20 |
| Electrical |
- Aux power 12VDC, 600mA max
- Supports up to four AH batteries
- Seven hour standby at 400 mA aux load with 4 amp hour
battery
- 16.5 VAC/24VA transformer
- Alarm output 12VDC, 2.0 amps max
- For UL installations, combined aux and alarm output cannot
exceed 700mA
|
| Output
Control |
- Support one relay board (part number 4204) for four relays
- Optional X-10 transformer/interface (part number 4300)
may be used to control up to eight X-10 recieving devices
|
| Zones |
- Eight hardwired zones
- Selectable response 10msec, 350msec, 750msec
- Assignable to either partition
- 16 zones types to choose from
- Programmable swinger suppression
|
| Expansion
Devices |
- Hardwired Expansion Devices
- 4219 - eight hardwired zones 16mA
- 4204 - up to four relays - 15mA standby (each active relay
draws and additional 40mA)
- 4229 - eight hardwired zones and two relays - 36mA
- Powerline Support - 4300 transformer / interface
|
| Accessories |
- 4286 VIP Voice Module -220mA
- 5881 ENL RF Reciever supports up to eight zones - 60mA,
5881ENM supports up to 16zones - 50mA, 5881ENH up to 40
zones - 50mA
- 5883 Transceiver supports up to 40 zones - 80mA
- Supports Eagle 1225 and 1221 boards
|
| Keypads |
- 6160 Custom English (required for programming) - 150mA/40mA
(6160) 130mA/40mA (6139)
- 6160V Custom English with voice - 150mA/40mA
- 6148 Fixed English LCD - 70mA/30mA
- 6150 Fixed English LCD - 70mA/40mA (6150), 40mA/20mA (6128)
- 6150 RF Fixed English LCD with built in reciever 105mA/80mA
- 6150V Fixed English LCD with voice 70mA/40mA
|
| Agency Listings |
- UL Residential Fire and Burglary and CFM
|
| Communications |
- Touchtone or pulse
- Formats supported, ADEMCO contact ID, ADEMCO 4 + 2 Express,
ADEMCO low speed, Sescoa/Radionics
- 3 + 1, 4 + 1 and 4 + 2 reporting
- Reporting capabilites, Split, Dual, Split Dual True dial
tone detection
- Low battery reports 11.2 - 11.6 VDC
- AC loss and restoral reporting supported
|
| |
|
| |
|
| |
|
| |
|
|
| |
| |
| |
|
|
|